EN
b
5
c
4
a
3-1
c
3-2
d
a
b
29
FABRIC COVERS
3. Side Pad Cover:
a. With the Headrest in its highest position, pull the Side
Pad Cover on over one Side Pad at a time, making
sure to support the base of the foam pad as you do.
Make sure that the red belt guide always remains
visible above the seat cover.
b. Tuck the edges of the Side Pad Cover around the silver
base of the L.S.P. Bolster on each Side Pad.
c. Secure the two snaps on the underside of the Side Pad
Cover to the front of the seat.
d. Pull the Side Pad Cover around to the back side of the
seat and wrap around the edges of the lower seat back
to secure.
4. Headrest Cover:
Pull the Headrest Cover on over the Headrest Pads, one
side at a time, making sure to support the base of the foam
pad as you do, and secure the three snaps at the rear of the
Headrest Cover.
5. Reclining Headrest Pad:
a. Slide the Reclining Headrest Pad onto the Reclining
Headrest, taking care to tuck the edges securely under
the silver handle at the top of the headrest.
b. Secure the hook and loop fasteners at the rear of the
pad to the Headrest cover.
c. Secure the two snaps on the underside of the Reclining
Headrest Pad through the loops on the Side Pad Cover.
To Next Page
Loading...
Need help?
General
