D-Link COVR-1900 User Manual

142D-Link COVR-1900 User Manual
Appendix C - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click
OK. (Windows® 7/Vista® users type cmd in the Start
Search box.)
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router. Some
firewall software programs may block a DHCP request on
newly installed adapters.

D-Link COVR-1900 Specifications

General

Brand	D-Link
Model	COVR-1900
Category	Wireless Router
Language	English