EasyManuals Logo
Home>D-Link>Webcam>DCS-2102 - SECURICAM Network Camera

D-Link DCS-2102 - SECURICAM Network Camera User Manual

D-Link DCS-2102 - SECURICAM Network Camera
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
26
SETUP > Dynamic DNS
If you have a DSL or Cable service provider that changes your modem IP address periodically,
Dynamic DNS (Domain Name Service), a method of keeping a domain name linked to a
dynamic IP address, is useful. With most Cable and DSL connections, you are assigned a
dynamic IP address and that address is used only for the duration of that specific connection.
With the DCS-2102/2121, you can set up your DDNS service and the DCS-2102/2121 will
automatically update your DDNS server every time it receives a different IP address.
Depending on the service, this update may take a few hours.
Enable DDNS: Check this checkbox to enable the DDNS function of the camera.
Server Address: Use the dropdown box to the right to select a DDNS service to use.
Host Name: Type in the Host Name of the DDNS service you wish to use.
User Name: Enter your User Name for the DDNS service you wish to use.
Password: Enter the password for the DDNS service you wish to use.
Verify Password: Retype the password for the DDNS service you wish to use.
After making any changes, click the Save Settings button to save your changes, or click the
Don’t Save Settings button to discard your changes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-2102 - SECURICAM Network Camera and is the answer not in the manual?

D-Link DCS-2102 - SECURICAM Network Camera Specifications

General IconGeneral
BrandD-Link
ModelDCS-2102 - SECURICAM Network Camera
CategoryWebcam
LanguageEnglish

Related product manuals