45D-Link DCS-942L User Manual
Section 3 - Conguration
Motion Detection
Motion detection enables the camera to monitor the video feed for movement.
Enable Video
Motion:
Enable PIR:
Sensitivity:
Drawing Mode:
Clear:
Refresh Image:
Select this box to enable the motion detection feature of your camera.
When this option is selected, the camera will use PIR (passive infrared) to detect
motion.
Species the measurable dierence between two sequential images that would
indicate motion. Please enter a value between 0 and 100.
Select Draw Motion Area to select the area of the picture to monitor for
movement to trigger recording or a snapshot. Use your mouse to click and
drag on the area that you would like to monitor for motion. Select Erase Motion
Area to clear a selected region and stop the camera from monitoring that area
of the picture.
Clears all motion detection areas from the picture.
Updates the image with a new one at the time the button is pressed.
Click Save Settings to save your changes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
