To Next Page

To Previous Page

Image Settings –

y Enable Anti Flicker: This option adjust the camera sensor’s setting to avoid the image flickering issue under certain light sources. Only use this option when it

is necessary.

y Flip Image: This will flip the image vertically. This feature can be used if you choose to mount the DCS-950G upside down on the ceiling.

y Mirror: This will flip the image horizontally in such a way that your left side will be on the left side of the screen and vice versa.

y Brightness: There are eleven levels ranged from -5 to +5 for less brightness and more brightness. After selecting your setting, please wait a few seconds for

the camera to adjust accordingly.