D-Link DGE-528T User Manual

2. Installation
Unpack and Inspect
CAUTION: Under ordinary circumstances, a DGE-528T card will not be affected by a static
charge that may be received through your body during handling of the unit. In special
circumstances, users may carry an extraordinarily high static charge and it is good practice to
reduce the charge by touching a ground before handling the adapter card.
Open the shipping carton and carefully remove all items. Ensure that the following
items are included:
 One DGE-528T PCI Gigabit Ethernet Adapter Card
 Drivers and Manual on CD-ROM
If any of these items are missing or damaged, please contact your local reseller for
replacement.
Software Installation
You must install the driver software for your DGE-528T before installing the PCI card
into your PC.
Insert the CD into your PC’s CD-ROM drive. It should begin running the driver
installation program.
When the screen shown below appears, click the Install Drivers.
If you do not have auto-execute enabled for your PC’s CD-ROM drive, navigate to the

D-Link DGE-528T Specifications

Operating Environment

operating temperature	0° ~ 40°C
storage temperature	-25° ~ 55°C
humidity	5 % ~ 90% non-condensing

Power

power consumption	3.42 Watts