D-Link DGE-528T User Manual

16
Type ipconfig /all at the prompt. Hit Enter. All the configuration settings are displayed as shown
below.
Checking the IP Address in Windows XP/2000/Vista
(Windows 98/ME users: go to Start > Run. Type Command. Type winipcfg at the prompt.
Click Release and Renew to obtain a new IP Address.)
Networking Basics
Type in Command
Click OK
Type ipconfig /renew at the prompt to get a new IP Address. Hit Enter. The new IP Address is shown
below:

D-Link DGE-528T Specifications

Operating Environment

operating temperature	0° ~ 40°C
storage temperature	-25° ~ 55°C
humidity	5 % ~ 90% non-condensing

Power

power consumption	3.42 Watts