D-Link DGE-528T User Manual

17
Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the
computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you
are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address,
please follow these instructions:
Assigning a Static IP Address
Click on Network Connections
Go to Start
Click on Control Panel

D-Link DGE-528T Specifications

Operating Environment

operating temperature	0° ~ 40°C
storage temperature	-25° ~ 55°C
humidity	5 % ~ 90% non-condensing

Power

power consumption	3.42 Watts