D-Link DGE-528T User Manual

18
For help with other tasks in home or small office networking, see Using the Shared Documents
folder and Sharing files and folders in the Help and Support Center in Microsoft Windows XP.
Other networking tasks
Click OK
You have completed the assignment of a Static IP Address. (You do not need to assign a Static IP
Address if you have a DHCP-capable Gateway/Router.)
Select Use the following IP Address in the Internet
Protocol (TCP/IP) Properties window
Input your IP Address and subnet mask. (The IP
Addresses on your network must be within the same
range. For example, if one computer has an IP Ad
dress of 192.168.0.2, the other computers should have
IP Addresses that are sequential, like 192.168.0.3 and
192.168.0.4. The subnet mask must be the same for
all the computers on the network.)
Input your DNS server address. (Note: If you are
entering a DNS server, you must enter the IP Address
of the Default Gateway.)
The DNS server information will be provided by your
ISP (Internet Service Provider.)
Highlight Internet Protocol (TCP/IP)
Click Properties
Assigning a Static IP Address continued

D-Link DGE-528T Specifications

Operating Environment

operating temperature	0° ~ 40°C
storage temperature	-25° ~ 55°C
humidity	5 % ~ 90% non-condensing

Power

power consumption	3.42 Watts