D-Link DIR-301 User Manual

40D-Link DIR-301 User Manual
Section 3 - Configuration
Device Information
This page displays the current information for the DIR-301. It will display the LAN, WAN, and Wireless information.
If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
Displays the MAC address and the private
(local) IP settings for the router.
Displays the MAC address and the public IP
settings for the router.
Displays whether or not the status of the
JumpStart feature is enabled or disabled.
Displays the wireless MAC address and your
wireless settings such as SSID and Channel.
LAN:
WAN:
Wireless
JumpStart:
Wireless:

D-Link DIR-301 Specifications

General

Brand	D-Link
Model	DIR-301
Category	Wireless Router
Language	English