EasyManuals Logo
Home>D-Link>Wireless Router>DIR-625 - RangeBooster N Router Wireless

D-Link DIR-625 - RangeBooster N Router Wireless User Manual

D-Link DIR-625 - RangeBooster N Router Wireless
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
54D-Link DIR-625 User Manual
Section 3 - Configuration
This page displays the current information for the DIR-625. It will display the LAN, WAN (Internet), and Wireless
information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
Displays the router’s time and firmware version.
Displays the MAC address and the public IP settings for the router.
Displays the MAC address and the private (local) IP settings for the
router.
Displays the wireless MAC address and your wireless settings such as
SSID and Channel.
Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP address assigned by the router
(DHCP).
Displays the Multicast Group IP Address.
General:
WAN:
LAN:
Wireless LAN:
LAN Computers:
IGMP Multicast
Memberships:
Device Information

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-625 - RangeBooster N Router Wireless and is the answer not in the manual?

D-Link DIR-625 - RangeBooster N Router Wireless Specifications

General IconGeneral
BrandD-Link
ModelDIR-625 - RangeBooster N Router Wireless
CategoryWireless Router
LanguageEnglish

Related product manuals