EasyManuals Logo
Home>D-Link>Network Router>DIR-651

D-Link DIR-651 User Manual

D-Link DIR-651
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background image
17D-Link DIR-657 User Manual
Section 3 - Conguration
Manual Conguration
Dynamic (Cable)
Select Dynamic IP (DHCP) to obtain IP Address information automatically from your
ISP. Select this option if your ISP does not give you any IP numbers to use. This option is
commonly used for cable modem services such as Comcast and Cox.
The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.
Check the box if you are having problems obtaining an IP address from your ISP.
Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These
addresses are usually obtained automatically from your ISP. Leave at 0.0.0.0 if you did not
specically receive these from your ISP.
Maximum Transmission Unit - you may need to change the MTU for optimal performance
with your specic ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the
Broadband Router. It is not recommended that you change the default MAC address unless
required by your ISP. You can use the Clone Your PCs MAC Address button to replace the
Internet ports MAC address with the MAC address of your Ethernet card.
My Internet
Connection:
Host Name:
MAC Address:
Primary/Secondary
DNS Server:
MTU:
Use Unicasting:

Table of Contents

Other manuals for D-Link DIR-651

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-651 and is the answer not in the manual?

D-Link DIR-651 Specifications

General IconGeneral
BrandD-Link
ModelDIR-651
CategoryNetwork Router
LanguageEnglish

Related product manuals