D-Link DVC-1000 User Manual

20
Using the DVC-1000 (continued)
Using an External Microphone for Speakerphone Calls
To improve the audio in a group videoconference, an external microphone
can be plugged into the external microphone connector on the back of the
DVC-1000. When an external microphone is used, the built-in microphone on
the front of the DVC-1000 is disabled.
External Microphone
Connector
Switching from a Private Call to a Speakerphone Call
Press the Speakerphone button on the DVC-1000 remote
control.
When the dialog appears on the video display telling you to hang
up the phone, go ahead and hang up the phone.
Speakerphone Mode is now active.
If a VideoPhone call is in progress using a telephone handset, Speakerphone
Mode can be enabled:
When in Speakerphone Mode with the built-in microphone, you should face
the DVC-1000 VideoPhone unit when you speak so the microphone will pick
up all your words. Speak louder as you move further from the microphone.
The recommended distance from the microphone in Speakerphone Mode is
6 to 8 feet. The sensitivity of the built-in microphone can be adjusted from the
Settings>Mic Vol Screen (see page 40).

D-Link DVC-1000 Specifications

General

Brand	D-Link
Model	DVC-1000
Category	Telephone
Language	English