D-Link DVC-1000 User Manual

44
A total of 7 ports must be opened for the DVC-1000 to work with most routers
or rewalls. To open these ports, please do the following:
A. Click Enabled
B. Give the Virtual Server a Name (such as DVC-1000)
C. Under Private IP, enter the IP address obtained from the
DVC-1000
(How to obtain an IP address from the DVC-1000:
Turn the DVC-1000 on. Using the remote control
highlight the Settings button on the Main Screen.
Navigate to Settings>Network>Network Address
>IP address)
D. Under Trafc Type, choose Both (TCP and UDP)
E. Under Private Port and Public Port, enter 15328
F. Under Schedule, click Always
G. Click Save Settings to save this entry
Opening Ports on Your Routers and Gateways (continued)
A
B
C
D
E
F
G
How to open ports on a router
Using the DVC-1000 with Routers, Gateways
or Broadband Modems (continued)

D-Link DVC-1000 Specifications

General

Brand	D-Link
Model	DVC-1000
Category	Telephone
Language	English