D-Link DWA-131 Quick Installation Guide

7
ENGLISH
SETUP  DRIVERS PRELOADED ONTO A CD
Insert the Driver CD into the CD drive. When the autorun screen
appears, click Install and follow the on-screen instructions.
Note: If the CD Autorun function does not automatically start on
your computer, press the Windows Key + “R”. In the run box type
“D:\autorun.exe” (where D: represents the drive letter of your CD
drive) and click OK.
1 /
Note: Do not plug in your Wi-Fi adapter until instructed.
The welcome screen will appear. Follow the wizard’s instructions
to complete the setup. Only plug the Wi-Fi adapter into your
computer when instructed to.
2 /
ENJOY!
You’re all good to go! Connect your computer to your network
using the Wi-Fi Name (SSID) and password of the Wi-Fi network you
wish to connect to.

D-Link DWA-131 Specifications

Wireless Standards

standard	IEEE 802.11n, IEEE 802.11g

Interface

bus type	USB 2.0 (1.1 compatible)

Frequency and Modulation

frequency range	2.4GHz to 2.4835GHz
modulation technology	Orthogonal Frequency Division Multiplexing (OFDM), Complementary Code Keying (CCK)

Power and Operating Conditions

operating voltage	5 VDC +/- 10%
operating temperature	32°F to 104°F (0°C to 40°C)
operating humidity	10% to 90% maximum (non-condensing)

Weight and Dimensions

dimensions	1.1” x 3.4” x 0.5”
weight	0.06 lbs (27.22g)