D-Link DWA-548 User Manual

7D-Link DWA-548 User Manual
Section 2 - Installation
Getting Started
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in the device
manager before installing your D-Link adapter.
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters (see below)
• Disable any built-in wireless adapters (refer to the next page)
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to
Remove Existing Installations
If you’ve installed a dierent manufacture’s adapter or a dierent model D-Link adapter, make sure the software is uninstalled
before installing the new software. Some utilities may cause a conict with the new software. If you plan to use multiple
adapters at dierent times, make sure the utilities are not set to load when your computer boots up. Windows® 7, Vista® and
XP users may use the built-in wireless utility for all adapters.
To remove any old software:
Windows® 7 users: Click Start > Control Panel > Uninstall Programs.
Windows Vista®/XP users: Click Start > Control Panel > Add or Remove Programs.

D-Link DWA-548 Specifications

General

Brand	D-Link
Model	DWA-548
Category	Adapter
Language	English