EasyManuals Logo
Home>D-Link>Switch>GO-SW-16G

D-Link GO-SW-16G User Manual

D-Link GO-SW-16G
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Before You Connect to the Network
The site where you install the Switch may greatly affect its performance.
Please follow these guidelines for setting up the Switch.
Install the Switch on a sturdy, level surface that can support at
least 3 kg (6.6 lbs.) of weight. Do not place heavy objects on
the Switch.
The power outlet should be within 1.82 meters (6 feet) of the
Switch.
Visually inspect the power cord and see that it is fully secured
to the AC power port.
Make sure that there is adequate space for proper heat
dissipation from and adequate ventilation around the Switch.
Leave at least 10 cm (4 inches) of space at the front and rear of
the Switch for ventilation.
Install the Switch in a fairly cool and dry place for the
acceptable temperature and humidity operating ranges.
Install the Switch in a site free from strong electromagnetic field
generators (such as motors), vibration, dust, and direct
exposure to sunlight.
When installing the Switch on a level surface, attach the rubber
feet to the bottom of the device. The rubber feet cushion the
Switch, protect the casing from scratches, and prevent it from
scratching other surfaces.
15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link GO-SW-16G and is the answer not in the manual?

D-Link GO-SW-16G Specifications

General IconGeneral
Switch typeUnmanaged
Switch layerL2
Quality of Service (QoS) supportYes
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity16
10G supportNo
Networking standardsIEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Jumbo frames9216
Forwarding rate23.81 Mpps
Number of queues8
MAC address table8000 entries
Packet buffer memory0.512 MB
Stackable-
Form factor1U
CertificationCE Class A, FCC Class A, VCCI Class A, BSMI, CCC UL, CB, LVD, BSMI, CCC
Product colorBlack
Number of fans0 fan(s)
Housing materialMetal
Mean time between failures (MTBF)305171 h
Heat dissipation39.92 BTU/h
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Package depth328 mm
Package width180 mm
Package height108 mm
Package weight1450 g
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)2055 mm
Pallet gross weight (air)491500 g
Quantity per pallet (air)300 pc(s)
Shipping (inner) case width340 mm
Shipping (inner) case height384 mm
Shipping (inner) case length569 mm
Shipping (inner) case weight15550 g
Shipping (inner) case net weight15000 g
Number of cartons per pallet (air)30 pc(s)
Quantity per shipping (inner) case10 pc(s)
Input current1 A
DC input voltage12 V
Power consumption (max)11.7 W
Number of power supply units1
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth126 mm
Width280 mm
Height44 mm
Weight870 g

Related product manuals