EasyManuals Logo
Home>D-Link>Switch>GO-SW-16G

D-Link GO-SW-16G User Manual

D-Link GO-SW-16G
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Section 3
Connecting the Switch
Switch to End Node
Switch to Hub or Switch
Connecting to a Server
Cable Quality
For all connections to the Switch, use these rules to determine the
For connections to 10BASE-T and 100BASE-TX devices, use
Category 5 or 5e UTP/STP cable.
For connections to 100BASE-TX and 1000BASE-T devices, use
Category 5e or better UTP/STP cable. All 1000BASE-T
connections operate in full duplex mode.
NOTE: All Ethernet ports auto-detect MDI/MDIX, port
speed (10, 100, 1000Mbps) and duplex of the device
connected to the Switch.
NOTE: UTP (Unshielded Twisted Pair) Ethernet
cabling is adequate for most small office environments.
More expensive STP (Shielded Twisted Pair) can also
be used, but is generally only needed where there will
be risk of strong Electromagnetic of Radio Frequency
Interference.
18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link GO-SW-16G and is the answer not in the manual?

D-Link GO-SW-16G Specifications

General IconGeneral
Switch typeUnmanaged
Switch layerL2
Quality of Service (QoS) supportYes
Power connectorDC-in jack
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity16
10G supportNo
Networking standardsIEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Jumbo frames9216
Forwarding rate23.81 Mpps
Number of queues8
MAC address table8000 entries
Packet buffer memory0.512 MB
Stackable-
Form factor1U
CertificationCE Class A, FCC Class A, VCCI Class A, BSMI, CCC UL, CB, LVD, BSMI, CCC
Product colorBlack
Number of fans0 fan(s)
Housing materialMetal
Mean time between failures (MTBF)305171 h
Heat dissipation39.92 BTU/h
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Package depth328 mm
Package width180 mm
Package height108 mm
Package weight1450 g
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)2055 mm
Pallet gross weight (air)491500 g
Quantity per pallet (air)300 pc(s)
Shipping (inner) case width340 mm
Shipping (inner) case height384 mm
Shipping (inner) case length569 mm
Shipping (inner) case weight15550 g
Shipping (inner) case net weight15000 g
Number of cartons per pallet (air)30 pc(s)
Quantity per shipping (inner) case10 pc(s)
Input current1 A
DC input voltage12 V
Power consumption (max)11.7 W
Number of power supply units1
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth126 mm
Width280 mm
Height44 mm
Weight870 g

Related product manuals