D-Link GO-SW-5G User Manual

D-Link GoSwitch5G/GoSwitch8G Unmanaged Gigabit Ethernet Switch
7
Power On
Plug one end of the AC to DC power adapter into the power connector of the Switch and the other end into the local power
source outlet.
After the Switch is powered on, the LED indicators will momentarily blink. This blinking of the LED indicators represents
a reset of the system.
Power Failure
As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch back in.

D-Link GO-SW-5G Specifications

General

Brand	D-Link
Model	GO-SW-5G
Category	Switch
Language	English