D-Link mydlink DSP-W215 User Manual

5D-Link DSP-W215 User Manual
Section 2 - Installation
Before you Begin
Safety
Please read all of the safety and operating instructions before using your device:
1. Do not open the device or attempt to repair or service it.
2. Use the device in a dry location, and avoid placing it in a humid environment.
3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect
from the power outlet and use a damp towel.
4. This device should only be used indoors.
Plan the location of your Smart Plug devices:
1. Connect Smart Plug devices into electrical outlets that are not controlled by a wall switch. This will help you to
avoid accidentally turning o power to the device.
2. Verify that your Smart Plug devices are electrically rated to operate with the power available in your location.
3. Be sure to plug the power cables into properly grounded electrical outlets in order to help prevent against electrical
shock.

D-Link mydlink DSP-W215 Specifications

Power

input voltage	100 to 240 V
power consumption	Maximum 5 W

Operating Environment

operating temperature	0 to 40 °C (32 to 104 °F)
storage temperature	-20 to 65 °C (-4 to 149 °F)
operating humidity	10% to 90% non-condensing
storage humidity	5% to 95% non-condensing

Weight and Dimensions

dimensions	117 x 66 x 39 mm (4.6 x 2.6 x 1.55 inches)
weight	125 grams (4.41 ounces)