Daewoo DLP-20D3N User Manual

MAIN MENU
PICTURE
SOUND
INSTALL
FEATURES
Position Access
Exit
19
DEFAULT ZOOM CONTROL
If the ZOOM control is set to AUTO (A15, see page 18 and 24, FORMAT SELECTION), then the picture format
presented is controlled by the received picture format signalling data embedded in the transmission. In the
absence of this signalling data (as can often be the case) a default format must be used. This default
format can be selected by the ZOOM AUTO function.
LANGUAGE
This can be changed at any time by the user in the LANGUAGE menu (accessed via the FEATURES
menu).
Main Menu
All menus are removed within
60 seconds if you don’t press any
button. Press the remote control
MENU button (A19) to display the
main menu. Then, you have the choice between several
sub-menus:
If you want to Exit the main menu, press the MENU button
(A19) a second time.
- To select one of the sub-menus, use the remote control CURSOR UP (A6), DOWN (A21) buttons.
- To enter the selected sub-menu, press the remote control OK button (A18).
Remark: In AV/S-VIDEO/COMPONENT/PC mode, the INSTALL menu is not available and will not be
selectable.
How to use the sub-menus
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.
- Adjust the function using :
Menus Description
- Select the
desired Position
by using the
remote control
CURSOR UP
(A6) or DOWN
(A21) buttons.
- The remote
control CURSOR
LEFT (A7) or
RIGHT (A20)
buttons if you
want to modify
the function
value.
- The remote
control
NUMBER 0...9
buttons (A3) to
enter directly
new data.
- Store (if
needed) by
pressing the
remote control
OK button
(A18).
- Then Exit to
main menu by
pressing the
MENU button
(A19).
GB

Daewoo DLP-20D3N Specifications

General

Brand	Daewoo
Model	DLP-20D3N
Category	LCD TV
Language	English