18
Connection
Viewing DTV
DTV Connections
< LCD TV Back view >
< LCD TV Back view >
< LCD TV Back view >
1. Connect LCD TV's Y, PB, PR terminal in Component 2 to DTV receiver's Video Out terminal using the external cable
2. Connect LCD TV's Sound terminals (left & right) in Component 2 to DTV receiver's Audio Out terminal using
the Audio cable
DTV receiver's output terminal can be marked Y, PB, PR or Y, CB, CR according to products.
(R)
(L)
PRPB
Y
(R)
(L)
PRPB
Y
< DTV receiver>
< DTV receiver>
• Some of DTV receiver(Set-Top-Box) have an PC Connector (D-Sub 15pin) instead of Component output .
• Connect Audio Cable from the Audio output terminal of receiver to the PC Audio input terminal of the LCD TV.
• This function does work in Component of 480p, 720p.
• Connect the SCART terminal of the LCD TV and the DTV receiver with the SCART cable.
1. Turn on the LCD TV and press on the remote controller.
2. Use to move to "Component2".
• If D-Sub 15 Pin terminal has been connected, select PC.
• If SCART terminal has been connected, select SCART1 or SCART2 .
3. Turn on the DTV receiver and select the channel that you want.
Connecting to the component terminal
Connecting to the PC terminal
Connecting to the SCART terminal
Connection terminals of other appliances differ by manufacturer and model.
Component Audio Cable
Component Connection Cable
(R)
(L)
PRPB
Y
< DTV receiver>
To Next Page
Loading...
Need help?
General
