20
Basic Use
Powering the LCD TV
Initial Settings
Power on/ off
• To turn the LCD TV on :
Press the "Main Power" button of LCD TV and then press the "Standby" button.
• To turn the LCD TV off :
Press "Standby" button on the LCD TV and then press the "Main Power" button.
Turning the main power switch off will save energy. It is the same as unplugging the power cord.
If ON Time setting is set, the main power should be ON.
• To turn on/off by remote controller :
Press the Power button of remote controller (If the LCD TV is not turned on, check that the "Main Power"
button on the LCD TV main body is turned on. The main power indicator will light up red if turned on).
CAUTION
-
After turning off the main Power, please wait at least more than 3 seconds to turn the main power back on.
• When the brand new television set is turned on for the first time, the following settings can be set using the plug
and play function of the TV.
• Press the "Main Power" button of LCD TV and then press the "Standby" button. You will see the Country
mode selection menu.
Use to move to the desired "Country".
Press to select.
Use to move to the desired "Language".
Press to select.
Press to go back to the previous menu.
• Automatically "ATM" beginning.
• After "ATM" ends, select the desired Language.
To Next Page
Loading...
Need help?
General
