18
External Equipment
Connection
External Equipment Connection
AV cable
When you connect with a component video cable, please check the colour of the cable between the DVD and TV
set.
Note:
1. The meaning of the component marking.
- ‘Y’ is a symbol for ‘Luminance’
- Pb is a symbol for ‘Picture Blue’ or B-Y
- Pr is a symbol for ‘Picture Red’ or R-Y
* Luminance ‘Y’ is made from Red + Blue + Green and
this leaves green for the ‘Y’ input.
2. HDMI connection.
- The meaning of ‘HDMI’ is High Definition Multimedia
Interface
- If your A/V equipment has only DVI output, you
should use DVI-to-HDMI cable to connect with this TV.
However this will only produce Video output. There-
fore you must ensure separate Audio cables are con-
nected to the PC AUDIO input.
3. Be sure that even if you connect CANAL+ decoder, the
CANAL information message will not display on the
screen.
4. When you connect external equipment, the output will
be as shown in the table below.
Connector Mode Output
AV1
(SCART)
TV(RF), AV1 TV Out
AV2 Monitor Out
Component, HDMI, PC Nothing
Component cable
Set Top Box
VCR/DVD/Camcorder/
Video Game
HDMI cable
Scart cable
Component cable
To Next Page
Loading...
Need help?
General
