HOW TO OPERATE
1. Wash
§ Insert the power plug into a wall
socket.
§ Set the selector at WASH AND
RINSE, and fill up the washer with
enough water for the washing load.
§ Put in the proper amount of detergent.
Pre-washing takes about 2 minutes and is immediately followed by the main
washing process.
Delicate fabric such as silk, wool do not need prewashing.
Divide colored and white clothing into seperate batches.
§ Depress one of the select switches
for SOFT or NORMAL washing.
§ Turn the washer timer to clockwise until you reach the desired wash time
position. This will activate the pulsator and washing will begin.
Do not attempt to turn the dial from “OFF” to the left, nor past the “15” mark.
3
After using the machine, unplug the
power cord from the socket.
To Next Page
Loading...
Need help?
General
