18
* QUICK 30
* SPIN ONLY
Put the laundry in the drum. Then close the door.
Press the Power button.
• The LED shows only “--” and all Program Lights turn on.
Select the spin speed by pressing Spin button.
Press the Start/Pause button.
• The washing machine will start operating by locking the door.
1
2
3
4
Put the laundry in the drum.
Then close the door.
•
In the detergent compartment, put the powder into the main wash section.
Softener should be poured into the middle section of the compartment and be
below the ‘MAX’ level.
•
Put detergent into the pre wash compartment only if you want to add prewash.
•
When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
•
The LED shows only ‘---’ and all Program Lights turn on.
Select the ‘Quick’ programme using the programme selection dial.
•
Water temperature ‘30’ ˚C, spin ‘800’ rpm and rinse ‘2’ times are selected
automatically.
•
If you want to change the water temperature, spin velocity or add wash options
(Rinse+, Crease Care), press each button.
Press Start/Hold button.
• The washing machine will start operating by locking the door and supplying
1
2
3
4
Note
• If you want to change the setting during operation, press the Start/Hold button to hold the operation and
press the button you want.
• Only ‘Cold’, ‘30’ ˚C and ‘40’ ˚C washing temperatures are available with the Quick 30 programme.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are may be chosen with this programme.
To Next Page
Loading...
Need help?
General