6
ELECTRICAL REQUIREMENTS
• An electrical earth is required on this machine
• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
• Don’t earth to a gas pipe.
• Don’t change the power supply cord plug.
• Check with a qualified electrician if you are not
sure the machine is properly earthed.
WARNING
Recommended earthing method
Electrical shock hazard : Failure to follow these instructions could result in
death or serious injury.
For your personal safety, this machine must be earthed.
It is fitted with a supply lead (A) attached to an earthed plug (B). To prevent
electric shock occurring, this machine must be plugged into the relevant
earthed power socket (C). It is the personal responsibility and obligation of
the customer to ensure that this is in place before the washing machine is
installed.
Drain system
• Never forget to install drain hose before operating your machine.
• Open the packing box, and there is a drain hose inside the drum.
• Connect the drain hose to the drain outlet at the back side of the machine.
•
The top of the washing machine must be at least 60cm high but no higher than 100cm from floor
level.
• When installing the drain hose to tub(sink), secure it tightly with string or a plastic strap.
• Proper securing of the drain hose will protect the floor from flooding.
• When the drain hose is too long, do not force it back into the machine as this will cause
excessive noise.
Level adjustment
1 If the washer is installed on an
unsuitable floor, it could make
considerable noise, vibrate and
cause a malfunction.
To Next Page
Loading...
Need help?
General