●
OTR preparation
Before setting OTR, Make sure that.....
The cassette tape has the safety tab.
The tape is long enough to record the programme.
◆
During recording you can switch the screen off by pressing button.
Meanwhile the recording continues.
◆
Yor can release the OTR mode by pressing “stop” during REC mode.
◆
If the display shows “AV” instead of “PR” press button.
◆
If you program events without setting the time, it will automatically return to
“Clock” mode. If you program events that overlap, at least one of your events
will not record correctly.
When setting the programmable timer, be careful not to overlap the
preset times. If you happen to overlap the preset programs, the End
time has priority and the overlapped programmes cannot be recorded.
◆
Your televideo is switched on by the main power switch on the front panel and by
the button.
10
RECORDING
cassettes
Simple recording - REC
One touch recording - OTR
When recording time overlaps
Choose the station whose
programme you want to record.
Start your recording.
If you wish to interrupt recording
briefly -then continue.
Stop your recording.
Choose the station you want and
press “REC/OTR” repeatedly until
desired period is displayed.
L
STOP
00:12:34
Pr 01 ARTE
Clock 12:34
PAUSE
00:12:34
Pr 01 ARTE
Clock 12:34
L
STOP
00:12:34
Pr 01 ARTE
Clock 12:34
M
REC SP
00:12:34
Pr 01 ARTE
Clock 12:34
M
OTR SP
00:12:34
0:30
Pr 01 ARTE
Clock 12:34
To Next Page
Loading...
Need help?
General
