12
◆
If you have not set the clock, when you press the VideoPlus+(Showview)
button to set timer recording, the set will automatically change to the “CLOCK”
menu.
◆
If you don’t have the VideoPlus+(Showview) numbers see page 11 for the
normal timer.
◆
If you have made a mistake, move back to the relevant position with the C
button and change the setting.
◆
During recording you can switch the screen off by pressing button.
◆
The screen will indicate if the station is not programmed (page 5~7).
◆
Should programmings overlap, you get a warning.
◆
In the case of error messages, correct the input or check the date and time on
your televideo (also check your TV guide).
◆
For timer recordings, clock, date, and stations must be set correctly (page 5).
◆
Load a cassette with its safety tab in place (see page 13) and with sufficient free
space for the recording.
RECORDING
cassettes
Timer recording using VideoPlus+ (ShowView): (Option)
Call the VideoPlus+
(ShowView) menu.
From your TV magazine, type
in the number next to the
programme you want to
record. (Digit key)
Confirm ( button)
◆ Showview :
FRANCE/CONTINENTAL
◆ VideoPlus+ : U.K. Only
0 - 9 : Digit entry
: Store
CLEAR : Delete
SV/V+ : Exit
Showview
---------
01/01/2001 13:57
If you press the button,
Timer Programme menu will
be displayed.
If you want to change data,
Press
VW
buttons.
Confirm ( button)
VW
: Select CLEAR: Delete
CB
: Access : Store
MENU : Previous
Timer programme
No. Pr. Date Start End PDC SP/LP
1 01 05 14:18 17:15 Off SP
2 --- --- --:-- --:-- Off SP
3 --- --- --:-- --:--- Off SP
4 --- --- --:-- --:--- Off SP
5 --- --- --:-- --:--- Off SP
6 --- --- --:-- --:--- Off SP
(Do not use the main power button on the front panel
of the set.) The televideo will switch on and off
automatically to record the timer event.
To Next Page
Loading...
Need help?
General
