9
BEFORE OPERATION
When your oven is plugged in, the display will show “ :0” and a tone will sound. If the AC power goes off and comes back on, the display
will show “:0”.
Your oven has a multiple(12hr/24hr) clock system. To set the clock, follow the procedure below.
Example : To set 5:30 AM in a 24hr clock system.
1. Touch Clock pad once.
The display will show “ 12H ”. This is a 12 hour clock system.
2. Touch Clock pad once more, the display shows “24H”.
This is a 24hour clock system. If you want 12hour clock system, omit this step.
3. Touch the pad ‘5’ to set the hour 5.
The digit starts blinking, the colon will light.
“ : 5” shows in display.
4. Touch the time set pad to set minutes, ‘3’, ‘0’ in sequence.
“5:30” shows in display.
5. Touch Clock pad. The colon starts blinking.
If you selected the 12hour clock system, this digital clock allows you to set the
time from 1:00 to 12:59.
If you selected the 24hour clock system, this digital clock allows you to set the
time from 0:00 to 23:59.
SETTING THE CLOCK
Note : You can check the current time while cooking is in progress by
pressing the Clock pad.
To Next Page
Loading...
