8
Make sure the oven is properly installed and plugged into the electrical.
OPERATIONS AND FUNCTIONS
11. Connect the mains lead to an electrical outlet.
12. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always
be in place during cooking.
13. Close the door securely.
14. The oven door can be opened at any time during operation by pulling the door.
The oven will automatically shut off. To restart the oven, close the door and then touch the START pad.
15. Each time a pad is touched. a BEEP will sound to acknowledge the touch.
16. The oven automatically cooks on full power unless set to a lower power level.
17. The display will show “: 0” when the oven is plugged in.
18. Time clock returns to the present time when the cooking time ends.
19. When the STOP/CLEAR pad is touched during the oven operation, the oven stops cooking and all information retained.
To erase all information (except the present time), touch the STOP/CLEAR pad once more. If the oven door is opened
during the oven operation, all information is retained.
10. If the START pad is touched and the oven does not operate, check the area between the door and door is closed
securely. The oven will not start cooking under the door is completely closed or the program has been reset.
Wattage output chart
The power level is set by touching the POWER pad. The chart shows the display, the power level and the percentage
of power.
Touch the POWER Pad
Once
Twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
Power Level(Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
00%
To Next Page
Loading...
Need help?
General
