Dahua DSS4004-S2 User Manual

Checklist 2
No.
Item
Description
5
HDD3
inserted.
6
HDD4
7
USB 2.0 Port
2 ports, white
8
Power Button
Press the button to start the device. The device is equipped
with power status indicator (blue normally on); long press it
to shut down the server.
1.2.2 Rear Panel
Figure 1-2 Rear panel
Table 1-3 Description
No.
Item
Description
1
Alarm Output
and Input
Reserved. Supports RS–485 protocol access.
2
Ethernet Port
Supports 10Mbps/100Mbps/1Gbps self-adaptive dual full
duplex. The platform default Ethernet port is 1.
3
Audio Output
3.5 mm audio output.
4
Audio Intercom
Input
3.5 mm audio input.
5
HDMI Port
2 channels, reserved.
6
VGA Port
DB 15 pin. Supports VGA port device access.
7
eSATA Port
Supports eSATA device access.
8
RS–232
Debugging serial port.
9
Single Power
AC 100V - 240V/47 - 63Hz; supports hot plug.
Device Installation 1.3
Connect cables according to port introduction, and then connect the server to power.

Dahua DSS4004-S2 Specifications

General

Brand	Dahua
Model	DSS4004-S2
Category	Server
Language	English