Dahua NVR41-P Series User Manual

340
Select one monitor channel video and then click Image button in section 9, the interface is shown as
Figure 5-17.
5.7.1 Image
Here you can adjust its brightness, contrast, hue and saturation. (Current channel border becomes
green).
Or you can click Reset button to restore system default setup.
Figure 5-17
5.7.2 Alarm output
Here you can enable or disable the alarm signal of the corresponding port. See Figure 5-18.
Figure 5-18
5.8 Zero-channel Encode
Select a window and then click zero-channel encode button, the interface is shown as below. See Figure
5-19.

Dahua NVR41-P Series Specifications

General

Brand	Dahua
Model	NVR41-P Series
Category	Network Hardware
Language	English