Si12-891 Removal of Thermistors
Removal Procedure 19
6. Removal of Thermistors
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
1. Remove the assembly of
thermistors.
î
Be careful not to lose the clip
for the thermistor.
1
Release the discharge
pipe thermistor.
2
Cut the clamp and pull
out the outdoor heat
exchanger thermistor.
3
The thermistors are
united as an assembly.
2. Remove the liquid / gas
pipe thermistors.
1
The figure shows the
liquid / gas pipe
thermistors.
(R7630)
Discharge pipe thermistor
(R12279)
Clip
(R7631)
Outdoor heat
exchanger thermistor
(R7632)
Outdoor
temperature
thermistor
(R7633)
To Next Page
Loading...
Need help?
General
