17 English
Standby electricity saving
The standby electricity saving function turns off power supply to the outdoor unit and sets the indoor unit into
standby electricity saving mode, thus reducing the power consumption of the air conditioner.
The standby electricity saving function works on the following indoor unit.
• The standby electricity saving function cannot be used for models other than the specified ones.
• Procedure for turning on standby electricity saving
function
1) Check that the main power supply is turned off. Turn it
off if it has not been turned off.
2) Remove the stop valve cover.
3) Disconnect the selective connector for standby
electricity saving.
4) Turn on the main power supply.
• Before connecting or disconnecting the selective connector for standby electricity saving, make sure that the main power
supply is turned off.
• The selective connector for standby electricity saving is required if an indoor unit other than the above applicable one is connected.
3MXM40*, 3MXM52*, 3AMXM52* only
For FTXM, FTXP, FTXJ, FVXM type
Standby electricity saving
function off.
Standby electricity saving
function on.
The standby electricity saving function is turned off before shipping.
3PEN417620-3N.book Page 17 Friday, June 21, 2019 9:50 AM
To Next Page
Loading...
Need help?
General
