12
User's manual
EN
Main screen
Access the main screen by pressing "Airzone" from the screensaver:
On/Off. Press to turn the zone On/Off.
Adjusting the temperature
72° Temperature Control.The temperature displayed on the screen is the current set-point temperature.
Adjust the set-point temperature on the Think Thermostat following the next instructions:
Select the set-point temperature using the control bar (by pressing or by sliding) to manually adjust by
increments of 1 ºF (0.5 ºC). Press once to adjust the set-point temperature by increments of 0.5 ºC (1 ºF).
Slide to adjust the set-point temperature in larger steps.
The permitted temperature range is:
• Heating Mode: 59 - 84 °F (15 ºC – 29 ºC)
• Cooling Mode: 64 - 86 °F (18 ºC – 30 ºC)
Note: Press the Airzone button to switch between heat and cool set-point temperatures.
There is a minimum difference allowed between heating and cooling set-point temperatures. The system
will prevent setting a temperature within the protection range.
Control bar
Timer
On/Off
Settings menu
Operation mode
User modes
Airow Control
Set-point
temperature
Local ventilation
Main screen/
conrm
Zone
Room temperature
Relative humidity
Navigation
To navigate through Wireless Thermostat, follow the instructions you will see on the screen. Press the side
buttons on the control bars to execute the instructions.
Zone
demand
To Next Page
Loading...
Need help?
General
