Daikin BRC1D61 User Manual

4. Description of the operation modes
1 FAN ONLY OPERATION C2)
In this mode, air only circulates without heating or
cooling.
2 DRY OPERATION [44]
In
this
mode,
the
air
humidity
will
be
lowered
with
a
minimal
temperature
decrease.
The temperature and fan speed are controlled
automatically and cannot be controlled by the remote
controller,
Dry operation will not function if the room temperature
is too low.
3 AUTOMATIC OPERATION {Al
In this mode, the controller will automatically switch
between heating and cooling as required by the
setpoint or limit temperature.
4 COOLING OPERATION Ft
In this mode, cooling will be activated as required by
the setpoint or limit temperature.
5 HEATING OPERATION
In this mode, heating will be activated as required by
the setpoint or limit temperature.
Hot start (heat pump types only)
At the start of a heating operation, the indoor fan is
stopped until a certain indoor heat exchanger
temperature is reached and is displayed.
This prevents cald air from leaving the indoor unit.
Defrost (heat pumip types only)
In
heating
operation,
freezing
of
the
outdoor
heat
exchanger
may
occur.
If
so,
the
heating
capacity
of
the
system
lowers
and
the
system
goes
into
defrost
operation.
The
indoor
unit
fan
stops
and
[6/(@®
ea]
is
displayed.
After
maximum
10
minutes
of
defrost
operation,
the
system
returns
to
heating
operation
again.
6 LIMIT OPERATION i" g max
Limit
operation
is
an
additional
made
that
enables
to
keep
the
room
temperature
within
certain
limits.
The
Rn
&
MX
icons
are
displayed
to
confirm
the
activation
of
the
limit
operation,
7 LEAVE HOME We
LEAVE
HOME
is
a
feature
that
enables
to
keep
the
toom temperature above 10°C when the occupants
are out. This function will switch on heating if the
installation is switched off.
5. Operation
Manual operation
In
manual
operation,
the
user
decides
about
the
settings
of
the
installation.
The.
last
setting
remains
active
until
the
user
changes
it,
As the controller can be implemented for a wide
variety of installations and features, it might occur that
you select a function that is not available on your
installation; if this Is the case, the WARE message
will appear.
Operation manual
5
DAIKIN
BRC1D61
Remote controller
3P107422-3D

Daikin BRC1D61 Specifications

General

Display	LCD
Dimensions	120 x 120 x 18 mm
Temperature Setting Range	10°C to 32°C
Compatibility	Daikin SkyAir and VRV systems
Power Supply	12V DC (supplied from indoor unit)