13
English
COMFORT AIRFLOW Operation
The fl ow of air will be in the upward direction while in COOL
operation and in the downward direction while in HEAT operation,
which will provide a comfortable wind that will not come in direct
contact with people.
To start COMFORT AIRFLOW
operation
Press 1. .
The fl ap position will change, preventing air from blowing •
directly on the occupants of the room.
“ •
” is displayed on the LCD.
Airfl ow rate is set to Auto.•
COOL/DRY: The fl ap will go up.
HEAT: The fl ap will go down.
To cancel COMFORT AIRFLOW
operation
Press 2. again.
The fl ap will return to the memory position from before •
COMFORT AIRFLOW mode.
“ •
” disappears from the LCD.
COOL operation HEAT operation
NOTE
Notes on COMFORT AIRFLOW operation
The fl ap position will change, preventing air from blowing directly on the occupants of the •
room.
POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same •
time.
Priority is given to the function of whichever button is pressed last.
The airfl ow rate will be set to Auto. If the upper and lower airfl ow direction is selected, the •
COMFORT AIRFLOW operation will be canceled.
01_EN_3P272441-5.indb 1301_EN_3P272441-5.indb 13 11/30/2010 4:01:42 PM11/30/2010 4:01:42 PM
To Next Page
Loading...
Need help?
General
