PAGE 18
Current Service Filter Runtime Hours (Setup Step 6) - This counter keeps track of
the number of hours of fan runtime in the Heating mode, Cooling mode, and in stand
alone Fan operation. Press OUTDOOR to reset.
Current Service Filter Calendar Days (Setup Step 7) - This counter displays the
total number of calendar days that have elapsed since the counter was reset to help
the user track Fan runtime. Press OUTDOOR to reset.
User Setup:
System Runtimes
System Runtimes (Setup Steps 6-17)
Set Service Filter Runtime Hours (Setup Step 14) - This timer allows the user to
specify the number of hours the fan will run before the “Replace Filter” alert will be
displayed. Press DOWN continuously until OFF is displayed to disable this alert.
Set Service Filter Calendar Days (Setup Step 15) - This timer allows the user to
specify the number of calendar days before the “Replace Filter” alert will be displayed.
Press DOWN continuously until OFF is displayed to disable this feature.
Press the SETUP button, then press MODE repeatedly
until the desired setup step appears. Use the UP or DOWN
buttons to make selection. Press MODE to advance to the next step.
Press SETUP to leave the setup screens.
Setup Step
30
These setup steps allow the user to monitor equipment runtimes and program
service alerts.
Runtime hours or days appear
here in the display.
Set Humidifier Calendar Days (Setup Step 17) - This timer allows the user to specify
the number of calendar days the Humidifier will run before the “Service Humidifier”
alert will be displayed. Press DOWN continuously until OFF appears to disable this alert.
Set UV Lamp Calendar Days (Setup Step 16) - This timer allows the user to specify
the number of calendar days the UV Lamp will operate before the “Replace UV Lamp”
alert will be displayed. Press DOWN until OFF appears to disable this alert.
Current UV Lamp Calendar Days (Setup Step 12) - This counter displays the total
number of calendar days that have elapsed to help the user track UV lamp runtime.
Press OUTDOOR to reset.
Current Humidifier Calendar Days (Setup Step 13) - This counter displays the total
number of calendar days that have elapsed to help the user track the Humidifier run-
time. Press OUTDOOR to reset.
Current Override Hours (Setup Step 11) - This counter displays the number of
hours the system has run in Override. Press OUTDOOR to reset.
D_TSTATD2200C-2_Manual_HR.pdf 26 8/29/13 1:11 PM
To Next Page
Loading...
Need help?
General
