14
Setting the time & the programme
Before you start
o Open the ap on the front of
the unit.
o Press all four buttons
(SELECT / ADVANCE / + / -)
at the same time
This will reset the unit, reinstate the
preset programmes and set the time to
12:00pm on Monday.
Setting the clock
o Press PROGRAMME once
o Use + and – buttons to set the
correct time
o When time is correct press
PROGRAMME again.
In 24 hour mode this will take you
straight to programming mode,
where you can select your own ON
and OFF times.
In 5/2 day mode this will rst allow you to programme the
correct DAY . To do this:
o use the + or – buttons to select the correct day
o press PROGRAMME again to enter RUN mode
To Next Page
Loading...
Need help?
General
