1.1 Description
The 300 A and 500 A current sensor kits are designed for
D2h/D4h/D7h/D8hdrives in the power ranges shown in
Table 1.1 and Table 1.2. To identify the power rating, see
chapter 1.1.1 Identifying the Power Rating.
Product group and series Voltage rating
(V)
Power rating [kW
(hp)]
VLT
®
HVAC Drive FC 102,
VLT
®
Refrigeration Drive FC 103,
VLT
®
AQUA Drive FC 202
(T4) 380–480 110–200
(150–300)
(T7) 525–690 75–315
(75–350)
VLT
®
AutomationDrive FC 302
(T5) 380–500 90–160
(125–200)
(T7) 525–690 55–250
(75–350)
Table 1.1 Applicable Power Ranges for 300 A Current Sensor Kit
Product group and series Voltage rating
[V]
Power rating [kW
(hp)]
VLT
®
HVAC Drive FC 102,
VLT
®
Refrigeration Drive FC 103,
VLT
®
AQUA Drive FC 202
(T4) 380–480 200–315
(300–450)
(T7) 525–690 200–400
(250–400)
VLT
®
AutomationDrive FC 302
(T5) 380–500 200–250
(300–350)
(T7) 525–690 160–315
(200–350)
Table 1.2 Applicable Power Ranges for 500 A Current Sensor Kit
1.1.1 Identifying the Power Rating
To
nd
the drive power rating, use the following steps:
1. Obtain the following information from the
nameplate, which is on the drive. Refer to
Illustration 1.1.
•
Product group and drive series
(characters 1–6)
•
Power rating (characters 7–10)
•
Voltage rating (phases and mains)
(characters 11–12)
2. Determine if the power rating is in Table 1.1 and
Table 1.2.
1 Product group and drive series
2Power rating
3 Voltage rating (phases and mains)
Illustration 1.1 Example Nameplate
1.1.2 Kit Ordering Numbers
Kit number Kit description
176F3752 300 A Current Sensor Conversion Kit
D2h/D4h/D7h/D8h
176F3737 500 A Current Sensor Conversion Kit
D2h/D4h/D7h/D8h
Table 1.3 Kit Numbers for 300 A and 500 A Current Sensor Kits
Installation Instructions
300 A/500 A Current Sensor Kit for
D2h/D4h/D7h/D8h Drives
VLT
®
FC Series FC 102, FC 103, FC 202, FC 302
Danfoss A/S © 07/2018 All rights reserved. MI70V202
To Next Page
Need help?
General
