Danfoss AK-CC55 Installation Guide

External display
AK-UI55
Cable 3 m: 084B4078
Cable 6 m: 084B4079
(L: Max. 100 m)
Data communication Important
Display
084B4075 / 084B4076 / 084B4077
Max. 10
The following controllers can be connected in
this way:
EKC 204A, AK-CC 210, AK-CC 250,
AK-CC 450, AK-CC 550 and AK-CC 55.
Refrigeration is resumed at the same time when
all controllers have terminated defrost.
AKV info
AKS 32R info
The signal from one pressure transmitter can be
received by up to 10 controllers.
There must not be a significant pressure drop
from the pressure transmitter's position in the
suction line to the individual evaporators.
230 V or 115 V
AC coil
230 V AC (115 V AC)
It is important that the installation of the data
communication cable is performed correctly.
See separate literature no. RC8AC902
RJ 12
Coordinated defrost via
cable connections
© Danfoss | DCS (vt) | 2019.07
AN294432763974en-000201 | 5

Danfoss AK-CC55 Specifications

General

Brand	Danfoss
Model	AK-CC55
Category	Controller
Language	English