6 User Guide RS8GY302 © Danfoss 2015-06 AK-PC 551
Display overview
End-user overview
The images in this daily user interface will depend on how the set-up is made. They will illustrate what is regulated.
For example: One or two suction groups, one condenser group, or a combination. See examples below:
1 condenser
group
1 suction
groupe
2 suction groups
2 suction groups
and
1 condenser
group
Each of the four rows above is continued with three additional displays.
The arrow in the top corner of the display shows the way to the next display in the same area
of operation. By clicking the right arrow you can see these three displays:
Active alarms Cleared Alarms Information on the controller
When an alarm is sent
from the controller, you
must advance to this
display to see the
alarm text.
To Next Page
Loading...
Need help?
General
