DHP-H Opti 6 8 10 12 16
Number of units 1
Dimensions L x W x
H
mm 690x596x1845
Weight empty kg 229 229 229 238 242
Weight filled kg 409 409 409 418 422
Sound power
level
11
dB(
A)
47 44 46 48 57
Measurements have been carried out on a limited number of circulation pumps, which can give variations in results. Tolerances in the measurement methods can also give
variations.
1) At B0W35 according to EN14511 (including circulation pumps). 7) The pressure that must not be exceeded outside the heat pump without falling below the
nominal flow. For the cooling circuit, these valves require pipe dimension Ø 40 x 2.4.
2) At B0W45 according to EN14511 (including circulation pumps). 8) Nominal flow: Heat circuit Δ10 K, cooling circuit Δ3 K.
3) According to IEC61000. 9) Fuse phase L1 (size 4 has 1-phase compressor).
4) Heat pump with 3 kW auxiliary heater (1-N 1.5 kW). 10) The values apply to new heat pumps with clean heat exchangers.
5) Heat pump with 6 kW auxiliary heater (1-N 3 kW). 11) Sound power level measured according to EN ISO 3741 at BOW45 (EN 12102).
6) Heat pump with 9 kW auxiliary heater (1-N 4.5 kW). *) Not available for this version
Service instructions VMGFC302 – 65
To Next Page
Loading...
Need help?
General