Danfoss Eco User Manual

15
VILTH102 © Danfoss | Heating Segment | 2017.04 |
Installation Guide Danfoss Eco™ Electronic radiator thermostat
4. Schedules and Temperatures
4.1 Time
The device will take the correct time from your smart phone. There is no need to set the time.
Danfoss Eco™ uses a 24 hour time display.
Note. If the batteries have been removed from the Danfoss Eco™ you will need to connect to the
Danfoss Eco™ App to correct the time once the batteries are replaced.
4.2 Default temperature
The default temperatures for Danfoss Eco™ are as below:
Icon Name Default Temperature
At Home 21°C
Away / Asleep 17°C
Vacation 15°C
The default temperatures can be changed in the Danfoss Eco™ App.
4.3 Setting temperatures
Set your own temperatures for your setback periods in the Danfoss Eco™ App.
Scroll on temperatures to set your preferred temperatures.
The Danfoss Eco™ can be set from 5°C to 28°C.
Danfoss recommend a difference between ‘At Home’ tem-
perature and ‘Away/Asleep’ that does not exceed 4 degrees.
Note. Changes in temperature from the home screen are
temporary (Until next setback period)

Danfoss Eco Specifications

General

Package weight	250 g
Accuracy	50 sec/month
Noise level	30 dB
Certification	CE, ERC, EAC
Product color	White
Smart thermostat	-
Spindle movement	2 - 4.5 mm
Operating frequency	2400 MHz
Wireless connection	Yes
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	4 - 28 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Display type	LCD
Battery type	AA
Battery voltage	1.5 V
Power consumption (typical)	1.2 W
Number of batteries supported	2

Weight and Dimensions

Weight	100 g