EasyManuals Logo
Home>Danfoss>Controller>EKC 302A

Danfoss EKC 302A User Manual

Danfoss EKC 302A
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 Manual RS8DZ702 © Danfoss 03-2012 EKC 202 / 302
Introduction
Application
The controller is used for temperature control refrigeration
appliances and cold room in supermarkets
• Control of defrost, fans, alarm and light
• EKC 202 for front panel mounting
• EKC 302 for DIN-rail mounting
Principle
The controller contains a temperature control where the signal
can be received from one temperature sensor.
The sensor is placed in the cold air ow after the evaporator or in
the warm air ow just before the evaporator.
The controller controls the defrost with either natural defrost or
electric defrost. Renewed cutin after defrost can be accomplished
based on time or temperature.
A measurement of the defrost temperature can be obtained
directly through the use of a defrost sensor.
Two to four relays will cut the required functions in and out – the
application determines which:
• Refrigeration (compressor or solenoid valve)
• Defrost
• Fan
• Alarm
• Light
The dierent applications are described on next page.
Advantages
Integrated refrigeration-technical functions
Defrost on demand in 1:1 systems
• Buttons and seal imbedded in the front (EKC 202)
• IP65 density from the front panel (EKC 202)
• Digital input for either:
- Door contact function with alarm
- Defrost start
- Start/stop of regulation
- Night operation
- Change-over between two temperature reference
- Case cleaning function
• Instant programming via programming key
• HACCP
Factory calibration that will guarantee a better measuring accu-
racy than stated in the standard EN 441-13 without subsequent
calibration (Pt 1000 ohm sensor)
Extra module
The controller can afterwards be tted with an insertion module
if the application requires it.
The controller has been prepared with plug, so the module
simply has to be pushed in.
Contents
Introduction ....................................................................................................... 2
Operation ............................................................................................................ 5
Menu survey ....................................................................................................... 6
Functions ............................................................................................................. 8
Override .............................................................................................................15
Connections .....................................................................................................16
Ordering ............................................................................................................18
Technical data ..................................................................................................19

Other manuals for Danfoss EKC 302A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss EKC 302A and is the answer not in the manual?

Danfoss EKC 302A Specifications

General IconGeneral
BrandDanfoss
ModelEKC 302A
CategoryController
LanguageEnglish

Related product manuals