© Danfoss | DCS (az) | 2018.06
DKRCC.PI.RS0.C6.02 | 15
MMIGRS2 Display Power Supply MMIMYK Gateway
User interface module MMIGRS2 Display AK-PS
Input: 100 – 240 V AC, 45 – 65 Hz
Output: 24 V DC: available with 18 VA, 36
VA and 60 VA
ACCTRD
Input: 230 V AC, 50 – 60 Hz
Output: 24 V AC, available with 12 VA,
22 VA and 35 VA
MMIMYK device is used as a gateway
to connect EKEs and the PC tool i.e
KoolProg software for parameter
setting or data logging.
Pressure Transducer Temperature Sensor
AKS Pressure Tranducer
Available with ratiometric and 4 – 20 mA.
NSK
Ratiometric pressure probe
XSK
Pressure probe 4 – 20 mA
PT 1000
AKS is a High precision temp. sensor
AKS 11 (preferred), AKS 12, AKS 21
ACCPBT PT1000
NTC sensors
EKS 221 ( NTC-10 Kohm) MBT 153
ACCPBT
NTC Temp probe (IP 67 /68)
ACCCBI Cable Stepper motor valves M12 cable
ACCCBI cables for MMI display and gateway. EKE is compatible with Danfoss stepper
motor valves i.e Danfoss ETS 6, ETS, KVS,
ETS Colibri®, KVS colibri®, CTR, CCMT
M12 Angle cable to connect
Danfoss stepper motor valve and
EKE controller
Related products
To Previous Page
Loading...
Need help?
General
