Danfoss GreenCon RC-C2 User Manual

10
Installation Guide GreenCon RC-C2/C4
GB
VIE2C32P Danfoss Heating Solutions
Both setting temperature and event time can be
modied.
Programming function allows users to dene tem-
perature setting for 4 time period during workdays
(Mon-Fri) and weekend (Sat-Sun)
2. Default set up
Starting time and temperature for each period
7:00 / 18 °C / 28°C
9:00 / 22 °C / 26°C
18:00 / 18 °C / 28°C
21:00 / 15 °C / 30°C
3. Programming of workday set up;
Long press“ ” for 5 seconds till “Mon.Tue.Wed.
Thu.Fri” icon displays;
Press “ < ” or “ > ” to adjust starting hour of rst event,
press “ ” to conrm;
Press “ < ” or “ > ” to adjust heating temperature dur
ing rst event, press “ ” to conrm;Press “ < ” or “ > ”
to adjust cooling temperature during rst event,
press “ ” to conrm;
Repeat above operation for next 3 events
4. Programming for weekend set up;
After nishing programming of work days, “Sat.Sun”
will appear on screen, repeat above steps to set start-
ing time and temperature on weekends.
From next event, GreenCon will automatically change
setting temperature according to this set up.

Danfoss GreenCon RC-C2 Specifications

General

Brand	Danfoss
Model	GreenCon RC-C2
Category	Thermostat
Language	English