8
Installation Guide GreenCon RC-C2/C4
GB
VIE2C32P Danfoss Heating Solutions
room temperature reaches setting temperature. See
parameter P11 in chapter 9 for more details.
5. Time setting and ON/OFF timer
• Time setting
Long press“ ” for 3 seconds till “hh” start ashing,
press “ < ” or “ > ” to adjust hour;
Short press “ ” , “mm” ash, press “ < ” or “ > ” to
adjust minute;
Short press “ ” , “week” ash, press “ < ” or “ > ” to
adjust weekday;
• Timer On/O setting
After nishing time setting, short press“ ” to
congure timer On/O function, press other button
or wait for 6 seconds to exit.
• Short press “ ” till “ON” start ashing;
Press“ < ” or “ > ” to adjust timer “ON” hour;
Press “ ” to conrm;
Press“ < ” or “ > ” to adjust timer “ON” minute;
Press “ ” to conrm;
• After setting timer “ON”, “ OFF” start ashing;
Press“ < ” or “ > ” to adjust timer “OFF” hour;
Press “ ” to conrm;
Press“ < ” or “ > ” to adjust timer “OFF” minute;
Press “ ” to conrm;
• Cancel ON/OFF timer
During above steps, adjust hour and minute to “--:--“
to cancel timer function; Or congure P02 to “02” in
parameter setting to disable timer function.
6. Keyboard lock