Danfoss Link DBR User Manual

12
VIIOS202 © Danfoss 07/2017
Installation Guide Danfoss Link™ DBR
Technical specications
Operation voltage 230 V AC, 50 Hz
Standby consumption 1.6 W
Load
3 amps resistive
1 amp inductive
Rated impulse voltage 2.5 kV
Switching Type 1B
Regulation ON/OFF
Ambient temperature 0˚ to +45˚C
Transmission frequency Wireless Z-wave 868.42 MHz
Transmission range in
normal buildings
Up to 30 m
Transmission power Max. 1 mW
Pollution situation Degree 2
Ball pressure test 75˚C
Software classication Class A
Software version 4.1.0 or higher
IP class 40
Dimensions 84 × 84 × 30 mm
Disposal instructions
NL
FR
UK

Danfoss Link DBR Specifications

General

Brand	Danfoss
Model	Link DBR
Category	Thermostat
Language	English